https://www.lozier.com/products/end-caps/three-way/three-way-end-cap-with-wall-sections/

Three Way End Cap with Wall Sections

Help transition customers from one aisle to the next with a Three-Way End Cap.

Three Way End Cap with Wall Sections

Help transition customers from one aisle to the next with a Three-Way End Cap.

How to Order

This End Cap features a combination of Lozier Products.  See below for details.

Contoured End Display

Product Details

Load Rating

  • 600 lbs evenly distributed per deck (13″ – 19″ D)
  • 800 lbs evenly distributed per deck (22 – 25″ D)

 

  • Same as Wall End Display except includes Contoured End Decks and Contoured Base End Trims.
  • Contoured Shelves also available (ordered separately)
  • Order Gap Filler to close off the bottom rear when unit is wider than the island width.
  • Actual width of unit equals nominal width plus 2″
  • Accepts Accessory Panels and connectors
  • Stabilizers required and ordered separately for Non-Compliant height to depth Contoured End Displays (See Product Safety information for Height to Depth Chart)
  • Contour decks and shelves with only one round corner available for two section displays.
View product details

Product Options and Numbers

QTY.
A. Uprite 2
B. Base Bracket (Standard or Heavy Duty) 2
C. Contoured End Deck 1
D. Closed Base Front 1
E. Top Rail 1
F. Center Rail (2 per section 78H-120H) 1 or 2
G. Bottom Rail 1
H. Splicer Rail (Sections 78H-120H) Use 2 top rails for splicer on 2′ and 30″ wide sections. 1
I. Back Material (1 or 2 per side) See Back Chart
J. Contoured Base End Trim (Pair) 1
K. Uprite End Trim 2
Contoured End Displays

ORDERING INSTRUCTIONS FOR CONTOURED END DISPLAYS


 

QTY.
A. Uprite (Standard or Heavy Duty) 2
B. Base Bracket (06 or Low Base Height)) 2
C. Closed Base Front (06 or Low Base Height) 1
D. Contoured Base End Trim (06 or low base height (Pair-LH/RH) 1
E. Contour End Deck 1
F. Hardboard Back and Rail Set 2-Sided 1
G. Uprite End Trim 2
    CED SIZES
Depth  Height
48″ 54″ 60″ 66″ 72″ 78″ 84″ 90″ 96″
13″ N/A N/A N/A N/A N/A N/A N/A
16″
N/A N/A N/A N/A
19″ N/A
22″
25″

Product Details

Product Options and Numbers

This End Cap features a combination of Lozier Products.  See below for details.

End Panels

Product Details

  • Used on ends of Wall or Island sections
  • End Panel hooks are reversible for left hand and right hand applications
View product details

Product Options and Numbers

Example Part #:   EP   48   22   06   LAX

 

End Panel: EP

Uprite Height: 36″, 42″, 48“, 54″, 60″, 66″, 72″, 78″, 84″, 90″, 96”

Base Deck Depth: 13″, 16″, 19″, 22“, 25″, 28″, 31”

Base Height: 06, LB

Standard Finish: LAX, Optional Catalog Laminates and Melamines

Suffix Key
06 -06 Base (8″H)
LB -Low Base (6″H)
LAX -Platinum Laminate

Top Pan for Three Way End Cap with Wall Sections

Product Details

Contact your Sales Rep for ordering Information

View product details

Product Options and Numbers

Part #:   CDB266

Contoured End Shelves

Product Details

  • Features rounded corners
  • 1.235″ Tag Molding formed on three sides
  • Optional Aluminum Tag Molding wraps continuously around all three sides (matches M13 profile)
  • Will not accommodate Wire Fronts
  • Evenly distributed load of 300 lbs per Shelf
  • Available in Standard (rounded corners both sides) or LH and RH (rounded corner one side only)

 

View product details

Product Options and Numbers

Example Part #:   CE   3   22   N  PLT

CED: Contour End Shelf

Round Corner: L (Left hand), R (Right hand) Blank (Both)

Width: 2′, 30″, 3′, 4′

Depth: 10″, 13″, 15″, 16″, 17″, 19″, 22″

Aluminum Tag Molding: MP Painted, MS Satin, N No molding

Standard Body Finish: PLT Optional Catalog Colors

Standard Molding Finish: Painted PLT Optional Catalog Colors, Satin SAT

Suffix Key
MS – Satin Molding
N – No Molding
MP – Painted Molding
PLT – Platinum

TL Shelf

Product Details

  • Two position tilt-in Shelf with extended bracket
  • Angular adjustment: flat or 17° downslope
  • Molding accommodates a 1.235″ tag
  • 1/4″ perforations for clip-on accessories
  • Can order with Aluminum Tag Moldings installed or can order Molding for Shelf separately
View product details

Product Options and Numbers

Example Part #:   TL   4   19   N   PLT

 

TL Shelf: TL

Width:  2’, 30″, 3’, 4′

Depth: 7”, 10”, 13″, 15″, 16″, 17″, 19”, 20″, 22″, 25″, 28″, 31″

Molding: N, M13P, M13S, M35P, M35S

Standard Finish:  PLT, Color Options

Finish When Ordering Painted Molding : 34K, Please Contact Product Management for multiple finish codes

Suffix Key
N – No Molding
M13P – M13 Painted Molding
M13S – M13 Satin Molding
M35P – M13 Painted Molding
M35S – M35 Satin Molding
PLT – Platinum
34K – Platinum Body & Platinum Painted Molding
 Shelf Depth    Downslope 
Flat  17°
7″ 300 lbs 300 lbs
10″ – 25″ 500 lbs 250 lbs
28″ & 31″ 400 lbs 200 lbs

Lbs. evenly distributed

DL Shelf

Product Details

  • Three position, drop-in shelf with extended bracket
  • Angular adjustment: flat, 17° or 30° downslope
  • 1/4″ perforations for clip-on accessories
  • Can order with Aluminum Tag Moldings or can order Molding for shelf separately
View product details

Product Options and Numbers

Example Part #:   DL   4   19   N   PLT

 

DL Shelf: DL

Width:  2’, 30″, 3’, 4′

Depth: 7”, 10”, 13″, 15″, 16″, 17″, 19”, 20″, 22″, 25″, 28″, 31″

Molding: N, M13P, M13S, M35P, M35S

Standard Finish:  PLT, Optional Catalog Colors

Finish When Ordering Painted Molding : 34K, Please Contact Product Management for multiple finish codes

Suffix Key
N – No Molding
M13P – M13 Painted Molding
M13S – M13 Satin Molding
M35P – M13 Painted Molding
M35S – M35 Satin Molding
PLT – Platinum
34K – Platinum Body & Platinum Painted Molding
 Shelf Depth    Downslope
Flat  17° 30°
7″ 300 lbs 300 lbs 125 lbs
10″ – 19″
500 lbs 250 lbs 250 lbs
20″ – 25″ 500 lbs 250 lbs 125 lbs
28″ & 31″ 400 lbs 200 lbs 100 lbs

Lbs. evenly distributed.

Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more