https://www.lozier.com/products/end-caps/versa-end-caps/versa-with-wire-wing-panels/

Versa with Wire Wing Panels

Part Number:

Create multiple End Cap configurations through the flexibility of Versa shelving components. Add promotional wing panels extend merchandising opportunities without intruding into the aisle.

Versa with Wire Wing Panels

Part Number:

Create multiple End Cap configurations through the flexibility of Versa shelving components. Add promotional wing panels extend merchandising opportunities without intruding into the aisle.

How to Order

This End Cap features a combination of Lozier Products.  See below for details.

Contoured End Display

Product Details

  • Same as Wall End Display, except uses Contoured End Decks, Contoured End Shelves, and Contoured Base Bracket End Trims
  • Order Shelves separately
  • Order Gap Filler separately when unit is wider than Island
  • Actual width of unit equals nominal width plus 2″
  • Base End Trim and Closed Base Front available in CHR only

 

TO ORDER OTHER BACK STYLES

  • Delete the Peg Front and/or Marteck Rear Back(s) and replace with the desired Back(s)
  • If Slotwall Backs desired, order required Rails

TO ORDER DECKS WITH ALUMINUM MOLDING

  • Delete Standard Deck and add Deck with Molding
View product details

Product Options and Numbers

Example Part #:   CED   4   60   22   06   S   P   M   PLT   PLT   PLT

 

Contoured End Display: CED

Unit Width: 2′, 30″, 3′, 4′

Uprite Height: 48″, 54″, 60″, 66″, 72″, 78″, 84″, 90″, 96″

Base Deck Depth: 13″, 16″, 19″, 22″, 25″

Base Height: 06, LB

Spring Locking Base Bracket: S

Front Back Style: P

Rear Back Style: M

Uprites and Uprite Trim Standard Finish: PLT, Optional Catalog Colors

Back and Rail Standard Finish:  PLT, Optional Catalog Colors

Deck Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
LB – Low Base (6″H)
06 – 06 Base (8″H)
P – Pegboard Back
M – Marteck Back
PLT – Platinum
    CED SIZES
Depth  Height
48″ 54″ 60″ 66″ 72″ 78″ 84″ 90″ 96″
13″ N/A N/A N/A N/A N/A N/A N/A
16″
N/A N/A N/A N/A
19″ N/A
22″
25″

Versa System

Product Details

HIGHLIGHTS

  • Converts existing sections into multiple width sections
  • Works with standard or heavy duty systems
  • Accepts most standard Lozier Shelves and Accessories
  • Order Heavy Duty Versa when existing section is Heavy Duty
  • Versa Half Splicer ordered separately as needed to splice Hardboard Backs
  • Backs must be ordered separately
  • Regular and Heavy Duty Versa supports standard load capacity of a 48”W system – 12,000 in-lbs

 

INCLUDES

  • Versa Uprite
  • Versa Spanners
  • Versa Top Rail
  • Half Splicer Rail (where applicable)
  • Versa Bottom Spanner
  • Bottom Rail Support

 

VERSA SYSTEM CONFIGURATIONS

  • Available 36”H to 96”H
  • If using Versa Slotwall, can use on Versa side only. Slotwall is not compatible on backside of Versa Section
  • Order Versa Half Splicer for Hardboard Backs on Sections 78”H and taller
  • See STD Hardboard Backs for ordering information
  • See Versa Slotwall VBE Backs for ordering information

 

VERSA SYSTEM 4′ CONFIGURATIONS

Versa-16-16-16 ConfigurationVersa-24-24 ConfigurationVersa-12-24-12 ConfigurationVersa-6-36-6 ConfigurationVersa-6-36-6 ConfigurationVersa-12-12-12-12 Configuration

 

 

 

 

 

 

 

 

VERSA SYSTEM 3′ CONFIGURATIONS

Versa-12-12-12-ConfigurationVersa-12-24-ConfigurationVersa-12-12-12-12-ConfigurationVersa-6-24-6-ConfigurationVersa-30-6-Configuration

View product details

Product Options and Numbers

Example Part #:   VS   4   54   3   H   H   PLT   PTD   PLT   PLT

 

Versa System: VS, VSH

Section Width: 3′, 4′

Section Height: 36″, 42″, 48″, 54″, 60″, 66″, 72″, 78″, 84″, 90″, 96″

Quantity of Versa Sections: 2, 3, 4

Spanner Style: H, S

Opposite Back Style: H, Omit if other

Uprite Standard Finish: PLT, Optional Catalog Colors

Spanner Standard Finish: PTD

Side A Rail Standard Finish: PLT, Optional Catalog Colors

Side B Rail Standard Finish: PLT, Optional Catalog Colors

Side B Rail Finish only required for sections 78″H or taller and with Hardboard selected on the opposite side.

Suffix Key
VS – Versa System to fit Standard Duty
VSH – Versa System to fit Heavy Duty
H – Hardboard
S – Slotwall
PLT – Platinum
PTD – Painted Random

Wire Wing Panels

Product Details

  • 48”H x 14”W x 5”D
  • Fully wrapped wings
  • Wires are spaced on 27/32” centers, accepts crossbar and 1” grid hooks
  • Two mounting methods available:
    • Welded Uprite Mounting Brackets: Mounts on left or right side with no loose hardware (recommend using shelf behind)
    • J-Mount Attachment Clips: Mounts direct to two shelves (two clips included)
  • When used with EMPs, Wire Wing Panel Bracket cannot be in the same Uprite slot as Shelf Bracket. J-Mount Clip must be used for stability and can only be used with a flat position Shelf
  • CANNOT be used with Contoured End Shelves

 

View product details

Product Options and Numbers

Example Part #:   WWP   48   14   WB   PLT

 

Wire Wing Panel: WWP

Height: 48″

Width: 14″

Welded Uprite Mount Bracket: WB, Leave blank for J-Clip

Standard Finish:  PLT, Optional QP3, Optional Catalog Colors

Suffix Key
PLT – Platinum
QP3 – Powder Chrome

Vertical Sign Channel for Wire Wing Panels

Product Details

Contact your Sales Rep for ordering Information

View product details

Product Options and Numbers

Part #:   DF499_

TL Shelf

Product Details

  • Two position tilt-in Shelf with extended bracket
  • Angular adjustment: flat or 17° downslope
  • Molding accommodates a 1.235″ tag
  • 1/4″ perforations for clip-on accessories
  • Can order with Aluminum Tag Moldings installed or can order Molding for Shelf separately
View product details

Product Options and Numbers

Example Part #:   TL   4   19   N   PLT

 

TL Shelf: TL

Width:  2’, 30″, 3’, 4′

Depth: 7”, 10”, 13″, 15″, 16″, 17″, 19”, 20″, 22″, 25″, 28″, 31″

Molding: N, M13S, M35S

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
N – No Molding
M13S – M13 Satin Molding
M35S – M35 Satin Molding
PLT – Platinum
 Shelf Depth    Downslope 
Flat  17°
7″ 300 lbs 300 lbs
10″ – 25″ 500 lbs 250 lbs
28″ & 31″ 400 lbs 200 lbs

Lbs. evenly distributed

DL Shelf

Product Details

  • Three position, drop-in shelf with extended bracket
  • Angular adjustment: flat, 17° or 30° downslope
  • 1/4″ perforations for clip-on accessories
  • Can order with Aluminum Tag Moldings or can order Molding for shelf separately
View product details

Product Options and Numbers

Example Part #:   DL   4   19   N   PLT

 

DL Shelf: DL

Width:  2’, 30″, 3’, 4′

Depth: 7”, 10”, 13″, 15″, 16″, 17″, 19”, 20″, 22″, 25″, 28″, 31″

Molding: N, M13S, M35S

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
N – No Molding
M13S – M13 Satin Molding
M35S – M35 Satin Molding
PLT – Platinum
 Shelf Depth    Downslope
Flat  17° 30°
7″ 300 lbs 300 lbs 125 lbs
10″ – 19″
500 lbs 250 lbs 250 lbs
20″ – 25″ 500 lbs 250 lbs 125 lbs
28″ & 31″ 400 lbs 200 lbs 100 lbs

Lbs. evenly distributed.

Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Ideas and Inspiration at Your Fingertips

Check out the Markets section for examples of our work in various market segments.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more