https://www.lozier.com/products/freestanding-displays/modular-tubular-merchandiser/modular-tubular-merchandiser/

Modular Tubular Merchandiser

The Modular Tubular Merchandiser is available in numerous height, width, and depth sections with S-Style, square nose, or no deck. Available back combinations include PEG, Marteck, or Multigrid (both sides).

Modular Tubular Merchandiser

The Modular Tubular Merchandiser is available in numerous height, width, and depth sections with S-Style, square nose, or no deck. Available back combinations include PEG, Marteck, or Multigrid (both sides).

Product Details

  • Tubular 1×2 construction
  • Independent tube T-sections connect via integral knobscrews to allow single or multi-section run merchandising.
  • Offset narrow slotting minimizes gaps between shelves on adjacent connected sections.
  • Available in multiple heights and depths, multiple back styles (Peg, Marteck, Multigrid), and numerous deck options (No Deck,S-Style,Square Front)
  • Accepts most Lozier shelves and accessories.
  • Optional 3/4″ x 1 1/4″ tube end frames (Peg, Marteck, Multigrid) or wire wing panels for end of run merchandising
  • Optional vertical or horizontal sign holders provide opportunity for graphic presentation
  • Not compatible with TL style shelves 22D
  • For multiple section runs order combination of below that include desired section widths and total to desired run length.
  • Equal depth adjacent sections are required to connect to one another.
  • 800 lbs evenly distributed load rating per section(400 lbs each side of each section)

Freestanding Displays Modular Tubular Merchandiser Exploded

  • Base unit consists of (Ordered Separately):
    A – (1) Modular Tubular Merchandiser Frame
    B – (2) Tubular System Backs
    C – (2) Tubular System Base Decks (optional)

 

  • Optional Accessories:
    • Modular Tubular Two-Way Wire Wing Panel
    • Modular Tubular Two-Way Horizontal Sign Holder
    • Modular Tubular Two-Way Vertical Sign Holder
    • Modular Tubular End Frame
    • Tubular End Frame Horizontal Sign Holder
Integral Knob Screw Connects Adjacent Sections Offset slot pattern minimizes gaps between adjacent shelves. Narrow slotting makes them less visible.

 

Modular Tubular Frame

Product Details

  • Tubular 1×2 construction.
  • Independent tube T-sections connect via integral knobscrews to allow single or multi-section run merchandising.
  • Offset narrow slotting minimizes gaps between shelves on adjacent connected sections.
  • Accepts Pegboard, Marteck, and Multi-grid Tubular Backs
View product details

Product Options and Numbers

Example Part #:   TUMCF   4    48    16    D    PLT  

 

Modular Tubular Merchandiser Caster Frame: TUMCF

Width: 2′, 3′, 4′

Height: 48″, 54″, 60″, 66″, 72″

Section Depth (each side): 13″ (Not available on 72″H), 16″, 19″, 22″

Double Retainer: D

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
D – Double Retainer
PLT – Platinum

Tubular System Deck

Product Details

  • Available in S-Series and Square Front
  • S-Series and Square Front Decks punched front and rear to accept fencing and other accessories.
View product details

Product Options and Numbers

Example Part #:   T  SD  2   16  N  PLT

 

Tube Two-Way Deck:  T

Deck Type: SD, SF

Width: 2′, 3′

Depth:  10″, 13″, 16″, 19″

Molding: N (Omit for SF)

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
SD – S-Series Deck
SF – Square Front
FI – Frames Base w/insert
N – No molding
PLT – Platinum

Tubular System Backs

Product Details

Available with Pegboard, Martek, or Multi-Grid Back Panels

View product details

Product Options and Numbers

Example Part #:   TUB   2   48   P  PLT

 

Tube Two-Way Back:  TUB

Width: 2′, 3′, 4′

Merchandiser Height:  48″, 54″, 60″, 66″, 72″

Back Style:  P, M, MG

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
P – Pegboard
M – Marteck
MG – Multi-Grid
PLT – Platinum

Modular Tubular Two-Way Horizontal Sign Holder

Product Details

  • Mounts on top tube via integral clamps
  • Side load Sign
  • Accepts up to 3/32″ thick signage
  • Also compatible with Mobile Tubular Two-Way Merchandizer
  • Sign size same as Nominal Sign Holder
View product details

Product Options and Numbers

Example Part #:   T2W   H   SH   2   6   PLT

 

Tube Two Way Merchandiser: T2W

Sign Type: H

Sign Holder: SH

Width: 2′, 3′, 4′

Height: 4″, 6″

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
H – Horizontal

Modular Tubular End Frame

Product Details

  • 3/4 X 1 1/4 Tube Construction
  • Available in heights to match section (must match section height)
  • Available widths: 2′, 30″, 3′, 4′ widths
  • Multiple Back Panel types available (PM, MM, MG)
  • Offset Narrow Slots
  • Load Rating 400# Note: End Frame Load contributes to T system Section Load
View product details

Product Options and Numbers

Example Part #:   MTE   60    2     P    M    PLT    PLT    PLT

 

Tubular End Frame: MTE

Frame Height: 48″, 54″, 60″, 66″, 72″

Frame Width: 2′, 30″, 3′, 4′

Exterior Back Style: P, M, MG (Note: MG style exterior is single grid flush front.
No interior back with MG.)

Interior Back Style: M

Exterior Back Color:  PLT, Optional Catalog Colors

Interior Back Color:  PLT, Optional Catalog Colors

Frame Color:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
P – Peg
M – Marteck
MG – Multi Grid
PM – Peg/Marteck
MM – Marteck/Marteck

Modular Tubular Two-Way Horizontal Sign Holder

Product Details

  • Mounts on top tube via integral clamps
  • Side load Sign
  • Accepts up to 3/32″ thick signage
  • Also compatible with Mobile Tubular Two-Way Merchandizer
  • Sign size same as Nominal Sign Holder
View product details

Product Options and Numbers

Example Part #:   T2W   H   SH   2   6   PLT

 

Tube Two Way Merchandiser: T2W

Sign Type: H

Sign Holder: SH

Width: 2′, 3′, 4′

Height: 4″, 6″

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
H – Horizontal

Mobile Tubular Two-Way Vertical Sign Holder

Product Details

  • Mounts down top of Tubular Uprite/Frame and saddles over T-Legs
  • Not compatible with Tube Two-Way w/Frame Insert Base or Tube Two-Way Top Cap (See Mobile Tubular Two-Way Top Cap)
  • Top load Sign
  • Recommended sign thickness: 3/16″ – 1/4″
  • Width: Same as Nominal, Height: Nominal minus 1 3/4″
View product details

Product Options and Numbers

Example Part #:   T2W   V   SH   48   12   PLT

 

Tube Two Way Merchandiser: T2W

Sign Type: V

Sign Holder: SH

Merchandiser Height: 48″, 54″, 60″, 66″, 72″

Width: 12″, 18″

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum

Tubular End Frame Horizontal Sign Holder

Product Details

• Mounts on top of Modular Tubular End Frame via integral clamps
• Side load

 

View product details

Product Options and Numbers

Example Part #:   TUEFSH   3   6   PLT

 

Tube End Frame Sign Holder: TUEFSH

Width: 2′, 30″, 3′, 4′

Height: 4″, 6″

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more