https://www.lozier.com/products/gondolas/high-capacity/high-capacity-system/

High Capacity System

Part Number:

High Capacity Wall or Island Systems provide a variety of display options for heavy and dense merchandise.

High Capacity System

Part Number:

High Capacity Wall or Island Systems provide a variety of display options for heavy and dense merchandise.

Product Details

  • Excellent for beverage products or other heavy, dense merchandise
  • Uprites and Base Brackets are welded assembly and available in 06 base height only
  • Overall Uprite depth is 5 3/4” (back to back welded HD Uprites)
  • System accepts standard rails & backs on one (1) or two (2) sides
    • Two sets of rails required if backs are installed flush both sides
  • Available in 78″, 84″, 90″, 96″ heights and 22″, 25″, 28″, 31″ depths
    • Gondola available same depth both sides only
  • Wall System accepts Standard, Heavy Duty, 06, or Low Base Bracket on opposite side with respective unbalanced capacity

High Capacity Uprite unbalanced load capacity – 35,000 in Ibs

 

How to Order

  1. Order desired run quantity 06 Base Island (IS) or Wall (WS)
  2. Order one (1), Island End (IE) or Wall End (WE)
  3. Order one (1) extra UET for each end of the run
  4. Order additional set of Top, Bottom, Center, and Splicer Rails if backs will be installed on rear side
  5. Delete all run Uprites and Base Brackets
  6. Order same quantity of High Capacity Uprites that were deleted in Step 5

Gravity Feed Shelf

A – Shelf
B – Wire Divider
C – Mat

High Capacity Uprite

D – Island Uprite
E – Wall Uprite

High Capacity Uprite

Product Details

  • Two (2) HD Uprites welded back-to-back
  • Welded HD Base Brackets (06 height)

High Capacity Uprite unbalanced load capacity – 35,000 in Ibs

Note: Side A & Side B Depth must be same for Island
For order quantity less than 6 order QTY 1 WMB781100 N/A

View product details

Product Options and Numbers

Example Part #:   UHC   96   22   PLT

 

Uprite High Capacity: UHC

Height: 78″, 84″, 90″, 96″

Depth Side A: 22″, 25″, 28″, 31″

Depth Side B: 22″, 25″, 28″, 31″, Omit for Wall

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Paint

HL Shelf

Product Details

  • Heavy Duty option
  • Taller bracket profile allows 40% higher load capacity
  • Tag moldings and perforations similar to TL Style
  • Can order with Aluminum Tag Moldings installed
  • Drop-in bracket design
  • 600 lbs evenly distributed (16″, 19″, 28″, 31″D)
  • 700 lbs evenly distributed (22″ & 25″D)
View product details

Product Options and Numbers

Example Part #:   HL   4   19   N   PLT

 

HL Shelf: HL

Width: 3’, 4′

Depth: 16″, 19”, 22″, 25″, 28″, 31″

Molding: N, M13S, M35S

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
N – No Molding
M13S – M13 Satin Molding
M35S – M35 Satin Molding
PLT – Platinum

Gravity Feed Shelf

Product Details

  • Fixed 8° downslant
  • Available 3′ or 4′ wide
  • Available 19″, 22″, 25″, 28″, 31″ deep
  • Holes to accept two-liter beverage or spray paint wire dividers
View product details

Product Options and Numbers

Example Part #:   BS   4   22   N   PLT

 

Gravity Feed Shelf: BS

Width: 3′, 4′

Depth: 19″, 22″, 25″, 28″, 31″ (Paint 19″ & 22″ only)

Molding: N, M13S, M35S (Ref aluminum tag molding)

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Paint
N – No Molding
M35S – Satin Molding
M13S – Satin Molding

Gravity Feed Wire Dividers

Product Details

  • Two (2) required per Gravity Feed Shelf
    • Order two (2) 18″W for nominal 3′ and two (2) 2’W for nominal 4′ shelves in the same respective depth
  • Silicone impregnated surface enhances gravity feed
  • Ribbed surface minimizes merchandise contact points and reduces friction
View product details

Product Options and Numbers

Example Part #:   BDIV   4   22   L2

 

Divider: BDIV, PDIV

Width: 3′, 4′

Depth: 19″, 22″, 25″, 28″, 31″ (Paint 19″ & 22″ only)

Style: L2, Omit for paint

 

Suffix Key
L2 – 2 liter
BDIV – Beverage Divider
PDIV – Paint Divider

Gravity Feed Mats

Product Details

  • Two (2) required per Gravity Feed Shelf
  • Order two (2) 18″W for nominal 3′ and two (2) 2’Wfor nominal 4′ shelves in the same respective depth
  • Silicone impregnated surface enhances gravity feed
  • Ribbed surface minimizes merchandise contact points and reduces friction
View product details

Product Options and Numbers

Example Part #:   BMAT   2   25   XG9

 

Gravity Feed Mat: BMAT

Width: 18″, 2′

Depth: 19″, 22″, 25″, 28″, 31″

Standard Finish: XG9, XH5

Suffix Key
XG9 – White
XH5 – Black
Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more