• Tear Drop slotting is adjustable; every 2” on center
• Factory assembled fully welded construction
• Standard Duty Posts have 1 5/8” x 3” cross-sectional dimensions
• Welded footplate included; requires floor anchoring
• Anchoring hardware not included (ordered separately)
• Evenly distributed load of 17,000 lbs per Uprite Frame at 48” maximum vertical beam spacing

TOP PROFILE

• Tear Drop slotting is adjustable; every 2” on center
• Factory assembled fully welded construction
• Heavy Duty Posts have 3″ x 3” cross-sectional dimensions
• Welded footplate included; requires floor anchoring
• Anchoring hardware not included (ordered separately)
• Evenly distributed load of 27,000 lbs per Heavy Duty Uprite Frame at 48” maximum vertical beam spacing

TOP PROFILE

• Available in multiple lengths and capacities
• Features a step design 1 5/8” deep with slots for incremental shelf support location
• 6” end clips have heavy duty rivets and a safety spring locking mechanism on the beam clip
• Beam lengths correspond with opening between Uprite posts

• Features “U” shaped design which hooks into slots in the pallet rack beams
• Required for all applications using load bearing shelves
• Nominal lengths correspond to nominal depths of conventional Pallet Rack Uprites

Shelf Supports (in conjunction with particleboard/wire shelves)
are required when levels are hand loaded or when palletized loads
do not rest on front and back beams (or when pallets do not have
sufficient strength to support the load in this fashion).

• Use for heavy duty applications
• Nominal lengths correspond to nominal depths of conventional Pallet Rack Uprites
• Not Available in GLV

Shelf Supports (in conjunction with particleboard/wire shelves)
are required when levels are hand loaded or when palletized loads
do not rest on front and back beams (or when pallets do not have
sufficient strength to support the load in this fashion).

• Provides for light penetration, water flow through for sprinklers and cleanliness
• Each grid is one-piece, 3” x 3” pattern, with 5/16” diameter width wires and 1/4” diameter depth wires
• Clearances are provided for easy installation
• Order Shelf Supports separately

• Economical shelving material
• Features 5/8” thick, industrial grade particleboard

• Features a flanged end design which wraps over the step beam and provides a support height flush with the beam top
• Suitable for supporting pallets on rack levels which do not require particleboard/wire shelves
• Two Pallet Supports are required per pallet
• Nominal lengths of Pallet Supports correspond to nominal depths of conventional Pallet Rack Uprites

• Provides extra protection against abuse from material handling vehicles
• Not usable with a beam located within 18” or 24” of the floor
• Requires floor anchoring
• Anchoring hardware not included (ordered seperately)

• Wall Ties are used to maintain proper spacing from a wall or for additional stability
• Uprites up to 96” tall require 2 Ties per Uprite
• Uprites over 96” tall require 3 Ties per Uprite
• Hardware to attach Wall Tie to the Uprite Frame included

• Row Spacers are used to maintain proper spacing between back-to-back runs
• Required on all back-to-back runs that have height to depth ratio of 6:1 or greater
• Uprites up to 96” tall require 2 spacers per Uprite
• Uprites over 96” tall require 3 spacers per Uprite
• Hardware included

• Replace damaged or worn safety clip
• Helps secure pallet racks and beams for added safety

• Safety Pins offer a secure safety connection from Beam to Uprite Frame
• Universal fit
• Easy to install
• Zinc coated

• Saddle brackets slide over rear beam; bolt underneath beam (hardware included)
• Sizes vary for storage of any handled item or as a simple divider
• Arm welded to bracket on an upward angle
• Flat plate on front for label

• Vertical divider for large products
• Two saddle brackets slide over rear beam; bolt underneath beam (hardware included)
• Compatible with multiple beam heights

• Use with Pallet Rack Particle Board Decking (LPRPB)