https://www.lozier.com/products/storage/s-series-storage-shelving/s-series-accessories/s-series-storage-marking-bench/
Back to All Products  |   You are in: Lozier   >   Products   >   S-Series Storage Marking Bench

S-Series Storage Marking Bench

S-Series Storage Shelving Marking Bench is built with standard Storage Shelving components and features a smooth Marteck top.

S-Series Storage Marking Bench

S-Series Storage Shelving Marking Bench is built with standard Storage Shelving components and features a smooth Marteck top.

Industrial Shelving S-Series Marking Bench Lozier
  • Industrial Shelving S-Series Marking Bench Lozier

Roll over image to zoom in.

Contact to Order
Download PDF Print Email Installation Instructions

Product Details

  • Built with standard Storage Shelving components and a smooth Marteck top
  • Available in three lengths (72″, 96″, 120″) with two rows of shelves
  • Overall unit height: 37″
  • Overall unit depth: 33″
  • S-Series Shelving section is 24″ narrower than top
  • 120″W Tops are two-piece and assembled in field
  • Order additional shelves separately
  • Order Locking Drawer separately

How to Order

Industrial-Shelving-S-Series-Storage-Marking-Bench-Assembly-Labeled-Lozier

COMPONENTS (ORDER SEPARATELY):

72″ Unit 96″ Unit 120″ Unit
A – Closed Uprite Assembly, 30″D x 36″H, #SSU30036P GLV 2 3 3
B – Top, 72″L x 33″D, #SS1243 MTK 1 0 0
B – Top, 96″L x 33″D, #SS1244 MTK 0 1 0
B – Top, 120″L x 33″D, #SS1245 MTK 0 0 1
C – Regular Duty Shelf, 36″W x 30″D, #SS330R GLV 0 6 0
C – Regular Duty Shelf, 48″W x 30″D, #SS430R GLV 3 0 6
D – Back Panel, 36″W x 36″H, #SSBP36036 N/A 0 2 0
D – Back Panel, 48″W x 36″H, #SSBP48036 N/A 1 0 2
(not visible) – #8 x 3/4″ Screws, #SS2221 N/A 4 8 8
(not visible) – Lock Washers, #SS1511 N/A 4 8 8

S-Series Storage Shelving Uprite Assembly

Product Details

  • Made of galvanized steel posts
  • Two Styles: Open and Closed Uprites
  • Open Uprite has galvanized steel Uprite braces (Pat. # 6,085,918)
  • Closed Uprite has 5/8” unfinished particleboard panel between two steel Uprite posts
  • Shelf lances are 2” on center
  • One assembly required for each section and at the end of each run

 

View product details

Product Options and Numbers

Example Part #:   SSU   12   048   N   GLV

 

S-Series Storage Uprite Assembly: SSU

Section Depth: 12″, 18″, 24″, 30″

Section Height: 048″, 060″, 072″, 084″, 096″, 108″, 120″, 144″

Uprite Style: N, P

Standard Finish: GLV

Suffix Key
N – Open Uprite Style
P – Closed Uprite Style
GLV – Galvanized

S-Series Storage Marking Bench Top

Product Details

  • Smooth Marteck surface
  • 120″W Tops are two-piece and assemble in field
View product details

Product Options and Numbers

Example Part #:   SS1243   MTK

 

S-Series Storage Marking Bench Top: SS1243 (72″L), SS1244 (96″L), SS1245 (120″L)

Standard Finish: MTK

Suffix Key
MTK – Marteck

S-Series Storage Shelves

Product Details

  • Pre-assembled, no loose hardware needed
  • Easy to install and reposition, adjusts in 2″ vertical increments

 

PARTICLEBOARD S-SERIES STORAGE SHELF

  • 5/8″ industrial grade particleboard
  • Regular Duty reinforced with 3/4″D x 3/4″H galvanized steel channels
  • Heavy Duty reinforced with 1 1/4″D x 3/4″H galvanized steel channels
  • Seal coated particleboard for durability and stain resistance
  • Regular Duty – Evenly distributed load of 500 lbs per Shelf
  • Heavy Duty – Evenly distributed load of 600 lbs per Shelf

 

WIRE GRID S-SERIES STORAGE SHELF

  • 1″ x 6″ Wire Grid
  • Reinforced 1 1/4″D x 3/4″H galvanized steel channel
  • Provides for light penetration, water flow through for sprinklers and cleanliness
  • Evenly distributed load of 500 lbs per Shelf
View product details

Product Options and Numbers

Example Part #:   SS   4   12   R   GLV

 

S-Series Storage Shelf: SS

Section Width: 3′, 4′

Shelf Depth: 12″, 18″, 24″, 30″

Shelf Type: R, H, WG

Standard Finish: GLV

Suffix Key
R – Regular Duty Shelf
H – Heavy Duty Shelf
WG  – Wire Grid
GLV – Galvanized

S-Series Storage Shelving Back Panels

Product Details

  • 1/8″ Hardboard, unfinished
  • 108″ – 144″ Backs are two-pieces joined with a Splicer
  • Notched to accept Back-to-Back Connectors
  • Can use on back of each section to create a closed or “closet” section
  • Back Panels (or Crossbraces) are required on ends of each run and every fourth section in between for stabilization
  • See diagram below for minimum recommended placement of Back Panels per run
  • Components include Back Panel(s), Screws, Washers and Splicer (ordered separately)

 

MINIMUM BRACING REQUIREMENTS DIAGRAM

crossbrace diagram

 

 

 

 

 

 

 

 

 

 

HOW TO ORDER BACK PANELS

Back Panel component requirements vary by Section Height. See chart below to determine part numbers and quantities needed for each section.

 BACK PANEL COMPONENTS BY SECTION HEIGHT
 SECTION HEIGHT
 36″W SECTION BACK PANEL QTY 48″W SECTION BACK PANEL QTY WASHER  (SS1511 N/A) QTY SCREW  (SS2221 N/A) QTY SPLICER  (SS1151 XB1) QTY
36″ 1 (SSBP36036) 1 (SSBP48036) 4 4 –
48″ 1 (SSBP36048) 1 (SSBP48048) 4 4 –
60″ 1 (SSBP36060) 1 (SSBP48060) 6 6 –
72″ 1 (SSBP36072) 1 (SSBP48072) 8 8 –
84″ 1 (SSBP36084) 1 (SSBP48084) 8 8 –
96″ 1 (SSBP36096) 1 (SSBP48096) 8 8 –
108″ 1 (SSBP36084) + 1 (SSEBP36024) 1 (SSBP48084) + 1 (SSEBP48024) 12 12 1
120″ 1 (SSBP36084) + 1 (SSEBP36036) 1 (SSBP48084) + 1 (SSEBP48036) 12 12 1
144″ 1 (SSBP36072) + 1 (SSEBP36072) 1 (SSBP48072) + 1 (SSEBP48072) 16 16 1

 

Back Panel Standard Finish: N/A (no finish)

 

View product details

Product Options and Numbers

S-Series Storage Screw

Product Details

  • #8 x 3/4” Phillips head sheet metal screws
  • Connect two open S-Series Storage Uprite Assemblies through the pilot holes punched in the Uprite post face to create a double-entry island
  • May also be used to attach Back Panels to Uprite Assemblies

 

Assembly Height # of Screws Required to Connect Uprites
36″ – 72″ 2
84″ – 108″ 3
120″ – 144″ 4
View product details

Product Options and Numbers

Part #:   SS2221   N/A

 

S-Series Back-to-Back Screw: SS2221

Standard Finish: N/A

Suffix Key
N/A – No Finish

S-Series Storage Shelving Lock Washers

Product Details

  • #8 lock washer, internal/external tooth
  • Used for S-Series Storage Shelving assemblies
View product details

Product Options and Numbers

Part #:   SS1511   N/A

 

S-Series Back-to-Back Screw: SS1511

Standard Finish: N/A

Suffix Key
N/A – No Finish

Recommended Products

Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more