Product Details
- 1″ vertical shelf adjustability
- Built-in leveling legs
- Base Brackets snap securely to Uprites via spring latch
- Electrical knockouts accommodate power & lighting
- Self-aligning Base Deck
- High Load Capacity
- Heavy Duty Uprites available for even more capacity
- Wiregrid retainers and backs are used to add any combination of single, double, or triple back sets to a Gondola Wall or Island section.
- The respective single, double, or triple back retainers are detailed in the Wiregrid Retainer Sizing Chart.
- RBE_ style wiregrid or hardboard backs can be used interchangeably in any of the Wiregrid Retainers.
Load Rating Information
Standard Duty- Load Rating
- Low Base -15,000 inch lbs unbalanced
- 06 Base- 12,000 inch lbs unbalanced
Heavy Duty- Load Rating
- Low Base -18,000 inch lbs unbalanced
- 06 Base- 20,000 inch lbs unbalanced
Downloads
Wiregrid Retainer Sizing Chart
Back Sizing Chart for Wiregrid Retainers
Dimensions
Wire Back Options
SG – Slotgrid
MG – Multigrid
LG – Louvergrid
Wire Retainer Options
S – Single Back
D – Double Back
T – Triple Back
How to Order
Top Rail
The Lozier Top Rail is used as a top trim piece on a Lozier Gondolas and end solutions
Wiregrid Back
Lozier offers three styles of Wiregrid Backs to fit your store environment and merchandising needs: Slotgrid, Multigrid, and Louvergrid.
Wiregrid Retainers
Wiregrid Retainers are required to connect Wiregrid Backs (Slotgrid, Louvergrid, or Multigrid) to the gondola uprites and rails.
Uprite
Uprites are an essential component, supporting your Backs, Rails, Shelves, Decks, Base Brackets and more. Each face of the Uprite serves a purpose in supporting your gondola display.
Splicer Rail
The Lozier Splicer Rail is used to separate two Backs for sections that are 102″ to 120″ high. For 2′ and 30″ sections use two Top Rails, one inverted.
Uprite End Trim
Uprite End Trim snaps onto first and last Uprite and/or Extension Uprite to finish the appearance of your gondola.
Wiregrid Bottom Rail
The Lozier Wiregrid Bottom Rail is a heavy duty Bottom Rail designed specifically for Wiregrid Backs.
Spring Locking Base Bracket
Our Base Bracket serves as the foot of your Wall or Island section, locking into the Uprite using an integral spring latch. Available in Standard or Heavy Duty.
Base End Trim
Finish off your Island or Wall Shelving run with our Base End Trim. The Trim attaches to the first and last Base Bracket of the run, hiding the Bracket from customers’ view.
Closed Base Front
The Closed Base Front snaps in place at the foot of your Island, Wall section or End Solution to block dust and other objects from collecting under your fixture. The Closed Base Front rests flush on the floor regardless of leveling adjustments.
Standard Deck
Base Deck acts as the bottom shelf of your unit and covers the floor beneath the fixture.
Components (order Separately)
Starter Quantity
Add-On Quantity
** Splicer Rail only used for 96″H. and taller sections.
***Wiregrid Bottom Rail (BR_ or BRHD_) MUST be used with Wiregrid Backs and Retainers. Standard Bottom Rails (R_B) are NOT compatible with Wiregrid Retainers.
Gondola Island (Wiregrid 2 Sides) Components
Order Components Separately
Related Products
Lozier Gondola
Gondola Island (1/4″ Backs)
Gondola Island (Open Backs)
Gondola Wall (Wiregrid & Marteck Backs)